China wholesaler 2000n Electric Linear Motor Linear Actuator Hydralic Cylinder Actuator diy cnc linear rail

Product Description

Technical parameters:

model  thrust speed push distance motor model
DTI 2000-700 2000 84 700 JW5612

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.

Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.

To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments. 

Technical specifciation:

NO. Type Trust
(kg)
Route
(mm)
Speed
(mm/s)
Motor 380(V) Le(mm) contour dimension
(L*W*H)mm 
weight
(kg) 
Type Power
(w)
Revolution
(T/Min)
Electricity
(A)
LeMin LeMax
1 25-20-I 25 200 48 AO25571 40 1400 0.23 369 569 580*125*118 7.5
2 25-20-II 25 200 96 AO25571 60 2800 0.23 369 569 580*125*118 7.5
3 100-40-I 100 400 42 AO5624 120 1400 0.47 640 1040 858*152*206 23
4 100-40-II 100 400 84 AO5622 180 2800 0.52 640 1040 858*152*206 23
5 300-50-I 300 500 42 AO6334 370 1400 1.12 745 1245 998*170*226 35
6 300-50-II 300 500 84 AO6332 550 2800 1.38 745 1245 998*170*226 35
7 500-50-I 500 500 50 AO7134 750 1400 2.02 778 1278 1098*190*226.5 52
8 500-50-II 500 500 100 AO7132 1100 2800 2.6 778 1278 1098*190*226.5 52
9 700-60-I 700 600 50 AO7134 750 1400 2.02 803 1343 1193*200*279 63
10 700-60-II 700 600 100 AO7132 1100 2800 2.6 803 1343 1193*200*279 63
11 1000-60-I 1000 600 50 JO2-21-4 1100 1400 2.68 883 1483 1260*204*271 75
12 1000-60-II 1000 600 100 JO2-21-2 1500 2860 3.24 883 1483 1260*204*271 75
13 1600-80-I 1600 800 50 JO2-31-4 2200 1400 4.9 1063 1863 1535*302*330  
14 1600-80-II 1600 800 100 JO2-31-2 3000 2860 8.06 1063 1863 1535*302*330  

1, Base 2, Coupling 3, Pump base 4, Pump 5, Fuel tank 6, Manifold block 7, Inspection mouth 8, Air filter 9,
Cylinder base 10, Throttle valve 11, Locking circle nut 12 Cold 13 live cold ring 14, cylinder body 15, guide
sleeve 16, cylinder head nut 17, dust cover 18, tighten the nut 19, connecting fork

Packing:

Due to the special nature of the product, the online price is
a regular offer, pls send your detail technical request, we will
offer you according to your actual needs.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Certification: FCC, CCC, RoHS, ISO, CE, ISO
IP Rating: IP50, IP54
Limit Switch: Built-in, Built-in
Samples:
US$ 1250/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

linear rail

How to Choose the Right Linear Rail for Your Fishing Rod

Compared to rods, linear rail is cheaper and offers a wide variety of applications. It is also corrosion resistant and has the ability to handle both tearing loads and torque forces.

A wide range of applications

Using a linear rail system is a good way to safely move things through a manufacturing process. They are used in a wide range of industries, and are especially helpful in moving items through packaging and production.
They are typically made from hardened materials such as steel, and have load-supporting balls on both sides. This helps them to handle loads from a few grams to thousands of kilograms, and can withstand overhung loads when paired with another rail.
Linear rails are also used in a variety of applications, including food and beverage production. In this industry, they are required to withstand harsh conditions and must adhere to local health and safety standards.
They are commonly used in weighing machines. They also find applications in CNC machines and moving robot arms in factory lines. The high level of rigidity and load capacity make them a good option for moving products with little friction.
Linear rails can be used vertically or horizontally. They are also a good choice for weight guidance when centered below the rail. They can join multiple rails for very long travel lengths, and can be joined to perform a seventh axis.
These rails can handle travel speeds of up to 5 m/s. They are commonly used in industrial applications, and can handle loads from a few grams to thousands. They are also useful for pneumatic and belt-driven systems, and are often used as actuator guide mechanisms.
There are many different types of linear rails. They range in size and length, and have a variety of processing methods. You can also find simple surface bearings, which are characterized by a low coefficient of friction.
For applications requiring precise positioning and precise travel accuracy, linear rail systems are the way to go. They provide the highest level of rigidity and are capable of achieving travel speeds of up to 5 m/s.
linear rail

They provide large travel spaces

Various applications may call for the use of a linear rail. These can be square, rectangular or round in shape and can handle loads from a few grams to thousands of kilograms. They also have a long lifespan.
In a nutshell, a linear rail provides low friction guidance for a load. They are used in the industrial sector in a number of applications. Aside from the obvious one’s, a single linear rail can save valuable floor space. It also ostensibly has the trifecta of a runner, power screw and ball bearings.
Linear rails are not for the faint of heart. Aside from the obvious cost, you will also be expected to mount, support and install them properly. You should also consider the size, shape and quality of the components. They can be bought in any length, from a few inches to several feet. They are also made from a wide variety of materials. Some of the materials used include steel, aluminum, and polymers. They can be shaped and joined to achieve very long travel lengths. They are also susceptible to damage.
The name of the game is to choose a good set of quality linear guides. There are two types in common usage today. The first is a runner with ball bearings, and the second is a runner with rollers. The latter is the less expensive choice. Aside from the usual suspects, you can also choose a saddle or fixed slide. It’s a good idea to use them in pairs. They are also the best suited for heavy duty applications.
The most important factor to consider when selecting a linear rail is the load capacity. While a single linear rail can be used in many applications, multiple rails are the best option for the job.

They withstand both tearing loads and torque forces

Generally constructed from corrosion resistant steel, linear rails are sturdy and robust enough to handle a wide variety of applications. They are usually used on mechanical systems with high precision requirements. They also provide a smooth and accurate motion.
In order to achieve the highest level of efficiency, the rail must be accurately supported and installed. It may also require some form of lubrication. The design of the rail may be influenced by factors like size, shape, and frequency of use.
For instance, linear rails are often used for actuator guides. These guide mechanisms provide a smooth, reliable, and low-friction motion. A runner is inserted inside the rail and moves from front to back. The runner may have ball bearings or a pair of sleeve bearings.
Another notable feature of the linear rail is the ability to withstand torque and tearing forces. They are also capable of handling larger loads, providing greater stability to the entire system. The most important feature is the fact that they are easy to install and remove. They are also capable of achieving high speeds.
There are many types of linear rails to choose from. Some may be suitable for consumer applications, while others are more suited for industrial applications. Some of the common factors that affect the lifespan of a rail include size, frequency of use, and mounting. A single rail is a space saver, while dual rails maximize bearing life.
Some of the major components in a linear slide include the runner, the bearings, and the carriage. In addition to the runner, the slide may also feature the motor, power screw, or other components. Some of these features are the smallest relative to the overall linear slide.
linear rail

They’re cheaper than rods

Choosing the best linear rails for your fishing rod is no small feat. You must understand the characteristics of various rails before you can find the one that best fits your needs. You may also want to consider choosing a rail that will last for many years. This is especially true if you are fishing in saltwater.
The best linear rails are designed with a variety of factors in mind. They will help you achieve precision and longevity. In addition, these guides are made of materials that are durable. They are also affordable. There are a variety of choices, including round and square rails.
The best rods have a good selection of features, including a good reel seat and flexible nickel/titanium snake guides. You should also look for a rod that has a smooth but firm handle and a rod that is easy to use. The best rods will also be a bit pricier, but you will not regret your investment.
The best rods use quality cork and stacks of smaller cork rings. The best rods have a cork handle that has a good feel. This handle has a big flare at the bottom and has narrow cork rings on the top. This handle is the best fly rod handle that you will find.
The best rods also have a well made reel seat that will hold firmly and easily. It should also have thin nylon spacers between the rings for a positive lock up. The reel seat should also be made from an anodized black aluminum up-lock seat with a synthetic gray insert.
The best rods also have reputable guide sets. This includes a new CERECOIL stripping guide made of nickel Titanium. This guide uses a multi-taper design that removes material from the weakest areas, thus improving dampening and recovery.

They’re corrosion-resistant

Stainless steel linear rails are essential in many industries, including vacuum applications, the pharmaceutical industry, and electronic circuit machines. They are also necessary for washing down cycles.
Stainless steel rails have excellent corrosion resistance. The steel surface is coated with an inert layer that prevents the rusting of the steel. Steel surfaces can rust over time, though, and rust can contaminate equipment. It’s important to check with your manufacturer about any corrosion resistance treatments that may be available.
Carbon steel linear bearings can be treated with hard chrome, black chrome, or a corrosion-resistant coating. These bearings are more expensive than those made of austenitic steel, but they provide similar corrosion resistance. They also have a lower hardness.
Silicon Nitride balls are another option. These balls are 40% lighter than steel, so they can carry higher loads without causing electrolysis. They’re also inert to chemicals and are capable of higher speeds. They’re available in closed or open designs. They come in four different sizes. They’re also coated with CZPT coating, which reduces the surface area of the balls in contact with the steel.
Another option is electroless nickel plating, which is inexpensive. This type of plating uses nickel instead of copper to prevent corrosion. It also offers a low friction coefficient.
Another option is drylin(r) linear technology, which combines the corrosion-resistance of thermoplastic bearing liners with shafting. This technology is ideal for chemical washdown environments, as well as those in saltwater environments. These systems also provide excellent rigidity and high load-bearing capacities.
Other types of linear guides are also available. Plain bearing guides may be appropriate for less expensive applications, while round shaft systems may be better for more expensive applications.
China wholesaler 2000n Electric Linear Motor Linear Actuator Hydralic Cylinder Actuator   diy cnc linear railChina wholesaler 2000n Electric Linear Motor Linear Actuator Hydralic Cylinder Actuator   diy cnc linear rail
editor by Dream 2024-05-15